Firearms Accessories -  Ruger 10/22 Parts & Accessories
Champion
 
Champion Traps and Targets Ruger 10/22
Extended Mag Release

Order #: 40418                         TBO Price: $6.95

Ruger 10/22 Extended Magazine Release
Shooters Ridge 10/22 Magazine Release
The mag release features a generous release tab that when pulled, quickly and
cleanly releases the magazine-enabling a shooter to insert a fresh, loaded magazine
for non-stop shooting fun.
Power Custom
 
10-22 Hammer & Sear Pack


Order #: PWR1022HSK            TBO Price: $72.95


Drop in kit that produces a 2 3/4 LBS. Trigger pull. These are the highest quality parts
on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power
Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2
Trigger Shims. Choose from Adjustable or Non Adjustable Versions. You can Adjust
the pretravel out of the Adjustable ones without any problem. You have to remove
the sear out of the gun to adjust it but once it is adjusted you can locktight the screw
with red locktight and it will hold with out any problems.

Does not work in the 10-22 Mag.
Ruger 10-22 Competition Hammer


Order #: PWR1022CH              TBO Price: $47.92


10-22 Competition Hammer- Drop in designed to lighten your trigger pull to 2 3/4 LBS.
Precision ground with vapor honed engagement surfaces. Includes extra power
hammer spring, replacement trigger return spring, and 2 hammer shims.

Please note: The new plastic trigger guards have different sears which must be
molded so, the trigger pull might not be as good with the new sears in the plastic
trigger guards. We have had several reports where the pull could be 4 to 6 lbs with
the Hammer only. We recommend the Adj. Hammer and Sears with the plastic trigger
guards.
Ruger 10-22 Titanium Bolt Handle Assembly


Order #: PWR1022TBH              TBO Price: $62.52


Bolt Handle is 1/2 longer and is lighter than factory. This assembly, along with the
Titanium Firing Pin (not included) make a lighter, smoother, more positive feeling
action for faster cycling and more positive ignition.ality machined aluminum mount
that will attach to your receiver with out drilling and tapping. Includes 6 cross slots to
allow for some scope ring adjustments. Includes 4 screws and an allen wrench.
Ruger 10-22 Titanium Firing Pin


Order #: PWR1022TFP             TBO Price: $35.89


Custom design profile produces a firing pin which is 43% lighter than the factory pin
for faster lock time. Improved impact point for more positive ignition and less chance
of misfires.
10-22 Competition Trigger Kit (Adjustable)


Order #: PWR1022CTK             TBO Price: $148.84


10-22 Competition Trigger Kit- Includes 10-22 Competition Hammer & Sear Pack, Black
or Red Aluminum Trigger or a Titanium Trigger with a hole through the trigger to
adjust the sear (trigger also has an overtravel adjustment screw), 2 Trigger Shims,
E.P. Hammer Spring, E.P. Disconnector Spring, & Replacement Trigger Return Spring.

Will not work in 10-22 Mag. Gives you about 2 3/4lbs trigger pull.
Ruger 10-22/MK-II Titanium Extractor


Order #: PWR1022TE              TBO Price: $13.99


Advanced extractor redesigned to be hard, sharp, & strong where it needs to be
which allows for more positive extraction. Includes Extra Power Extractor Spring for
the 10-22 only.
   
ProMag
 
ProMag Ruger 10/22 & Charger Extended Tactical Magazine
Release

Order #: PM235                       TBO Price: $16.99
Ruger 10/22 and Charger Extended Bolt Release


Order #: PROPM244               TBO Price: $14.90


The PM244 Extended Bolt Release is EDM wire-cut from stainless steel to stringent
tolerances to ensure a drop-in fit.
Replaces the tiny stock bolt release on Ruger 10/22* rifles /carbines, and the 10/22
Charger* pistol, to enable faster reloading.
The PM244 Extended Bolt Release when used in conjunction with the PM235
Extended Magazine Release, will provide the competition or tactical shooter with the
fastest possible reloading time.
Stainless Steel
EDM machined
Parkerized finish
Drop in fit, no Gunsmithing required
ProMag Ruger 10/22 & Charger Recoil Buffer 3Pk



Order #: PM201                       TBO Price: $14.49


The PM201 Ruger 10-22* and Charger* Recoil Buffer is manufactured from high
density polyurethane. The buffer replaces the bolt stop pin and greatly reduces the
possibility damage caused by the bolt battering the recoil pin. The buffer eliminates
metal to metal contact. The buffer is light weight and extremely durable. The recoil
buffer is a drop in replacement part requiring no modifications. The buffer is
unaffected by oils or solvents. The buffer fits the Ruger 10/22* and Charger *Long
Rifle and 10/22* Magnum rifle and carbines Three recoil buffers are included per
package.
Features:

Manufactured from high density polyurethane
Buffer eliminates metal to metal contact
Light weight and extremely durable
Drop in replacement part requiring no modifications
Unaffected by oils or solvents
Three recoil buffers are included per package
Made in U.S.A
ProMag Ruger 10/22 Carbine Tactical Barrel Band



Order #: PM185                        TBO Price: $36.90


Carbine Tactical Barrel Band is CNC machined from T6 aircraft grade aluminum, and
type-III hard anodized. The barrel band is reversible. The Tactical Barrel band places
a short MIL-STD 1913 Picatinny rail or a fixed loop to accept up to 1.25" slings on the
left or right side of the carbine. The Tactical Barrel Band also places a short MIL-STD
1913 Picatinny rail on the bottom of the band. The rails are handy for mounting a
fore-grip, flashlight, laser, or bipod to your Ruger 10-22* carbine. No permanent
modification is required, all mounting hardware is included.
Features:

CNC machined from T6 Aircraft Grade Aluminum
Type III hard anodized
Reversible
Loop accept up to 1.25" slings
Handy for mounting a fore-grip, flashlight, laser, or bipod
No permanent modification is required, all mounting hardware is included
Made in U.S.A.

*Ruger, 10-22 and Charger are registered trademarks of Sturm, Ruger Company, Inc.
RUGER
 
BX-Trigger



Order #: RUG90462              TBO Price: $89.95


Perfect upgrade for 10/22 rifles and 22 Charger pistol models because of the
significantly reduced pull weight of 2.5-3.0 lbs. With minimal overtravel and a positive
reset. Rugged, reliable and safe (meets or exceeds industry standards for drop
testing), this new and improved Genuine Ruger Factory Accessory comes in a
completely self-contained module and is easy to install.
B06602 Barrel Retainer


Order #: RUGB06602               TBO Price: $5.00

Blued
Ruger 10/22 Blued Barrel Band Screw (B69)


Order #: RUGB69                 TBO Price: $2.59


Made by Ruger for the best possible performance
The Barrel Band Screw used for either the old style (alloy) or new style (synthetic)
barrel bands.
Ruger 10/22 Bolt Stop Pin (B46)



Order #:RUGB46               TBO Price: $2.59


Fits Ruger 10/22 rifles
Bolt assembly
Black Finish
Ruger 10/22 Takedown Screw (B65)


Order #: RUGB65                TBO Price: $2.55

Fits Ruger 10/22 rifles
Stock disassembly screw
Black Finish
Ruger 10/22 Barrel Retainer Screw (B67)


Order #: RUGB67              TBO Price: $2.59


Made by Ruger for the best possible performance
The B67 is screw associated parts: B-66 barrel retainer, that fits 10/22 rifles.
   
VOLQUARTSEN
 
Black Extended Magazine Release for Ruger 10/22 and 10/22
Magnum 22 LR


Order #: VOLVC10MRB                 TBO Price: $22.00


The extended magazine release allows for a quick release of factory magazines.
Simply reach in front of the trigger guard and push forward, no more having to push
up on the factory release. It extends .550" down from the trigger guard housing
designed not to interfere with benchrest or sandbags during shooting. The
extended magazine release is completely CNC-machined from billet material – no
castings!!
RUG 77/22 BLACK EXTENDED MAG RELEASE
Release for Ruger 77/22


Order #: VOLVC77MRB                 TBO Price: $22.00


Black - Allows for a quick release of factory magazines - Reach in front of the trigger
guard and push forward - It extends .550 degrees down from the trigger guard
housing designed not to interfere when shooting
RUG 77/22 SILVER EXTENDED MAG RELEASE
Release for Ruger 77/22


Order #: VOLVC77MRS               TBO Price: $22.00


Silver - Allows for a quick release of factory magazines - Reach in front of the trigger
guard and push forward - It extends .550 degrees down from the trigger guard
housing designed not to interfere when shooting.
HP Action Plus Kit, Black, 10/22


Order #: VOLVC10HPB10P              TBO Price: $159.58


This kit consists of our target hammer (includes shims and bushings), hammer
spring, target disconnector, target sear and target trigger Includes polished plunger
and spring) with overtravel adjustment.
Also included is a recoil buffer to reduce wear on the action and bolt.
The HP Action Kit will give the shooter one of the most crisp, clean trigger pulls
available. Reduces trigger pull down to approximately 2.25 – 2.5lbs. HP Action Kit
Plus features our High Performance Kit, Extended Magazine Release and Auto Bolt
Release.
Ruger 10/22 22 LR HP Action Kit



Order #: VOLVCHPB10            TBO Price: $132.95

This kit consists of our target hammer (includes shims and bushings), hammer
spring, target disconnector, target sear and target trigger Includes polished plunger
and spring) with overtravel adjustment. Also included is a recoil buffer to reduce
wear on the action and bolt. The HP Action Kit will give the shooter one of the most
crisp, clean trigger pulls available. Reduces trigger pull down to approximately 2.25 –
2.5lbs.
HP Action Plus Kit, Silver, 10/22


Order #: VOLVC10HPS10P            TBO Price: $159.58


This kit consists of our target hammer (includes shims and bushings), hammer
spring, target disconnector, target sear and target trigger Includes polished plunger
and spring) with overtravel adjustment.
Also included is a recoil buffer to reduce wear on the action and bolt.
The HP Action Kit will give the shooter one of the most crisp, clean trigger pulls
available. Reduces trigger pull down to approximately 2.25 – 2.5lbs. HP Action Kit
Plus features our High Performance Kit, Extended Magazine Release and Auto Bolt
Release.
CNC-Machined Bolt for Ruger 10/22 22 LR


Order #: VOLVC10BLT               TBO Price: $254.87


Complete CNC-Machined Bolt features our hardened and tuned extractor for
positive, consistent extraction. It also includes our round titanium firing pin. This
round design eliminates the unnecessary movement found on most 10/22 firing pins.
The CNC-machining process allows us to hold the head spacing to exact dimensions
eliminating the need for having your factory bolt reworked. Bolt is case hardened
and then a black nitrite finish applied for improved lubricity during cycling. Ejection
port side of the bolt is then polished. Specs

Recoil rod and spring designed specifically for this bolt included
Recoil buffer included

6oz base weight
Target Sear for Ruger 10/22 and 10/22 Magnum 22LR


Order #: VOLVC10ES             TBO Price: $49.95


Manufactured through an EDM process for exacting tolerances for a crisp, light
trigger pull. Drop-in item that requires no stoning. Made of A2 tool steel and
hardened to Rc 58-60.
Target Disconnector for Ruger 10/22 and 10/22 Magnum LR


Order #: VOLVC10DN             TBO Price: $27.89


Manufactured through an EDM process for exacting tolerances. Designed to be used
in conjunction with match hammer and sear to provide for a very crisp, clean trigger
pull. Made of A2 tool steel and hardened to Rc 58-60.
Target Hammer for Ruger 10/22 and 10/22 Magnum 22 LR


Order #: VOLVC10TH             TBO Price; $46.00


Our redesigned target hammer is now wire EDM cut! The target hammer is designed
to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory
hammer. No stoning or fitting is required. Reduces trigger pull down to
approximately 2.5 – 2.75lbs. Made of stainless steel, hardened to Rc 58-60. Includes
our 10/22 hammer spring, hammer bushings, hammer shims and trigger return spring.
Target Trigger for Ruger 10/22 and 10/22 Magnum 22 LR


Order #: VOLVC10TT             TBO Price: $30.69


Improved trigger design gives the shooter more trigger control. Also features an
overtravel adjustment screw. Made of aluminum.
Silver Extended Bolt Handle and Recoil Rod Assembly for
Ruger 10/22 22LR


Order #: VOLVC10EBS               TBO Price: $50.49


The Extended Bolt Handle features the same shape and design as the bolt handle
featured on our fully machined bolts. This handle has also been extended .25" for
faster, easier operation. The recoil rod is polished, hardened and coated with a
proprietary finish. This finish is not only extremely hard, but also contains lubricating
features to create an extremely smooth operating guide rod. This coated recoil rod
reduces friction which improves both feeding and ejecting. A recoil rod spring is
also included. This spring has been cryogenically treated to withstand years of use.
Exact Edge Extractor for Ruger 10/22 and 10/22 Magnum 22LR


Order #: VOLVC10EE              TBO Price: $17.79


The Exact Edge Extractor is manufactured through an EDM process to produce
exacting tolerances. The new extractor will not lose its edge under impact such as
other extractors made from stamped steel or titanium that will have their edges roll
over and actually cause extraction problems after a short period of use. Our
extractor features a very precise hook point. It is hardened to a Rc 58-60 to
withstand years of use and still maintain its edge. We are able to hold the tolerances
to +/-.0001" by utilizing the EDM manufacturing process. The hook is .005" closer to
the rim of the cartridge to allow for the most positive extraction available. Made of
A2 tool steel.
Automatic Bolt Release, Silver, 10/22


Order #: VOLVC10BRS10           TBO Price: $15.23


Enables the shooter to simply pull bolt back slightly to release the bolt. This
eliminates the need to push up on the bolt lock mechanism to release the bolt. This
is an easy drop-in installation. Available in silver or black.
Automatic Bolt Release, Black, 10/22


Order #: VOLVC10BRB10              TBO Price: $15.23


Enables the shooter to simply pull bolt back slightly to release the bolt. This
eliminates the need to push up on the bolt lock mechanism to release the bolt. This
is an easy drop-in installation. Available in silver or black.
Recoil Buffer for Ruger 10/22 and 10/22 Magnum 22 LR


Order #: VOLVC10RB               TBO Price: $14.95


Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between
bolt and receiver and eliminates vibration caused by this. The recoil buffer also
provides a remarkable difference in cycling noise. Replaces factory bolt stop pin.
Hex-Head Take Down Action Screw for Ruger 10/22 and 10/22
Magnum


Order #: VOLVC10TD              TBO Price: $6.89


Hex-head screw replaces the factory slotted screw. It allows the shooter to use a
torque wrench for precise and repeatable settings. No more marred slotted screws
which diminish the apperance of your rifle. Made of hardened alloy steel.
Ruger 10/22 22 LR Black Stabilization Module


Order #: VOLVC10ACB               TBO Price: $59.89


accuracy. Turned from lightweight aluminum so it will not change the balance or feel
Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased of
your rifle. Installs easily onto non-threaded .920" bull barrels with supplied socket
head cap screw. Specs

2oz base weight
Ruger 10/22 22 LR Silver Stabilization Module


Order #: VOLVC10ACS              TBO Price: $59.89


Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased
accuracy. Turned from lightweight aluminum so it will not change the balance or feel
of your rifle. Installs easily onto non-threaded .920" bull barrels with supplied socket
head cap screw. Specs

2oz base weight
Trigger Guard TG2000 Ruger 10/22 22LR, Black


Order #: VOLVCTP1B10               TBO Price: $285.86


The TG2000 is a complete CNC-machined trigger guard equipped with precision EDM
parts providing a crisp, clean 2lb trigger pull! It features both pretravel and
overtravel adjustments that can be adjusted by the shooter to their individual
preference. This match trigger guard is CNC-machined from a solid billet of high
strength aircraft aluminum. The hammer, sear and disconnector are precision wire
EDM-cut from A2 hardened tool steel with tolerances being held to +/- .0002"
assuring every trigger let off to be extremely consistent. The CNC-machined trigger
is hard black anodized. The trigger is reset internally to eliminate any dragging or
inconsistencies caused by a conventional trigger plunger. An automatic bolt release
and an extended magazine release are also included. The TG2000 is machined to
give a superb, crisp trigger that will provide years of enjoyment to the shooter who
demands the very best. The TG2000 is now available in a variety of anodized colors.
Specs

6oz base weight
Trigger Guard TG2000 Ruger 10/22 22LR, Silver


Order #: VOLVCTP1S10             TBO Price: $274.89


The TG2000 is a complete CNC-machined trigger guard equipped with precision EDM
parts providing a crisp, clean 2lb trigger pull! It features both pretravel and
overtravel adjustments that can be adjusted by the shooter to their individual
preference. This match trigger guard is CNC-machined from a solid billet of high
strength aircraft aluminum. The hammer, sear and disconnector are precision wire
EDM-cut from A2 hardened tool steel with tolerances being held to +/- .0002"
assuring every trigger let off to be extremely consistent. The CNC-machined trigger
is hard black anodized. The trigger is reset internally to eliminate any dragging or
inconsistencies caused by a conventional trigger plunger. An automatic bolt release
and an extended magazine release are also included. The TG2000 is machined to
give a superb, crisp trigger that will provide years of enjoyment to the shooter who
demands the very best. The TG2000 is now available in a variety of anodized colors.
Specs

6oz base weight
Timney Trigger
Assembly
 
Ruger 10/22 Complete Trigger Assembly - Black



Order #: TIM10221C            TBO Price: $282.53


The new Timney 10/22 trigger will undoubtedly set the standard for the future of
aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of
CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the
Ruger 10-22 is a complete action replacement. The trigger, sear, and hammer are
wire EDM cut and heat treated steel for exceptional durability. Push out the two
action pins and “drop in” the new Timney Complete Trigger assembly. The new
Timney 10-22 Trigger features a Timney designed Extended Magazine release that
can be operated by one finger for exceptional ease and accessibility. It also comes
standard with an auto bolt release. As with all the Timney Triggers made in the U.S.A.
each complete action replacement is hand assembled, calibrated and tested for a
lifetime of reliable service. The trigger is set at 2 3/4 pounds from the factory, with no
creep.
   
   
   

TBO Sporting Goods

Predator Calls:

Turkey, Elk, Deer, Moose

Predator Decoys:

Predator Calling
Accessories:

Bipods & Shooting Sticks

Clothing - Camouflage:

Scent Elimination:

Predator Calling DVD's

TBO T-Shirts
___________________________________
Accuracy Products:
Lead Sled, Rests, Benches, Bags, Vises.

Firearm Accessories:

Cases - Long Gun & Pistol  

Choke Tubes

Gun Cleaning & Maintenance

Gunsmithing & Gun Parts

MTM CASE GARD:

Hunting Accessories:
Trail Cameras

Knives & Accessories:


Magazines and Loaders:
  • Ruger 10/22 Magazines


Optics:
Binoculars

Rangefinders

Red Dot Sights

Rifle Scopes

Reloading Components

Reloading Equipment
Die Sets:
Shellholders & Shell Plates
  • Hornady
  • RCBS
  • Calipers & Measuring
  • Rifle & Handgun Brass
  • Bullets
  • Bullets Molds & Accessories

Survival Gear

Targets: